Nouveau!
| Optical zoom from the wide side (except RX1 series and RX0). |
| Movie Only. |
| Shooting interval of maximum recoded pixels. |
| Still Image Only. |
| When using "Memory Stick PRO-HG Duo". |
| This camera can play back only the files recorded by itself. |
| Recommended Exposure Index |
| The LCD screen is turned on, shot once every 30 seconds, flash strobe once every two times, turn power off and on once every ten times. |
| Continuous shooting is possible for approximately 29 minutes (limited by product specifications,default setting. except DSC-RX0, DSC-RX0M2 and DSC-RX100M7). |
| Speed will be slowing after taking some shots. *without CMOS models |
| You may not be able to shoot images in Burst mode depending on the Shooting mode. |
| REI = Recommended Exposure Index |
| For movies, compatible Memory Stick PRO Duo (Mark2), Memory Stick PRO-HG Duo,Memory Stick XC-HG Duo, Memory Stick Micro (Mark2), SD/SDHC/SDXC memory card or microSD/microSDHC/microSDXC card (Class 4 or faster speed is recommended) can be used. |
| When ISO sensitivity is higher than IS0 3200, the slowest shutter speed limit is 1/4 sec. Manual setting of ISO sensitivity to lower than ISO 3200 is necessary to set shutter speed slower than 1/4. (except DSC-RX0, DSC-RX1, DSC-RX10, DSC-RX100 series models). |
| Indication recording time, which is defined by repeating the cycle: Power on, start recording, zoom, stand-by, power off. |
| Models capable of extended-gamut recording and HDMI transmission function for both still images and movies. |
| Continuous shooting speed will be reduced when used together with built-in or external flash. |
| At maximum pixel readout. |
| Speed will be slowing after taking some shots. |
| With compatible Sony external flash |
| Varies according to shooting conditions or memory card used |
| Supports Micro USB compatible device. |
| Number of effective pixels varies depending on camera settings. |
| Speed will be slowing after taking some shots. |
| Rechargeable battery pack NP-BN cannot be used with Cyber-shot that are supplied with NP-BN1 |
| Only wide |
| with Adaptor (optional) |
| When power is supplied. |
| Achieved by using "By Pixel Super Resolution" technology and overlay burst shooting. |
| For movies, Memory Stick Micro (Mark2), or microSD/microSDHC/microSDXC card of Class 4 or faster is necessary. |
| not supplied AC Adaptor AC-UD10 |
| Sony accessories for the Accessory Shoe can be attached. |
| Supports Micro USB compatible device. |
| Achieved by using overlay burst shooting. |
| Product software update may be necessary. |
| Based on non-stop recording until the limit (29 minutes or 2GB) has been reached, and then continued recording again. Shooting functions such as zoom will not be available. |
| Based on non-stop recording until the limit of continuous shooting has been reached, and then continued recording again. Other operations will not be available. |
| Self-Timer is available. |
| Passed MIL-STD810G C1 Method 516.7-Shock test onto 5cm plywood. Depending on use conditions and circumstances, no guarantee is made regarding damage to, malfunction of, or the water-proof performance of this product. |
| SONY test conditions |
| Only when 35mm-equivalent focal length is within 150-600mm range. |
| The panoramic shooting range may be reduced, depending on the subject or the way it is shot. Therefore even when [360°] is set for panoramic shooting, the recorded image may be less than 360 degrees. |
| Value displayed on the camera and recorded in the Exif |
| Available with firmware ver. 3.00 or later |
| Wi-Fi does not work |
| Audio can be output only during playback mode. |
| 7 images are captured in one shot. |
| This function is available only when the menu language is set to English on North American models. (As of the release date) |
| The LCD screen is turned on, shooting once every 30 seconds, the power turns on and off once every ten times. |
| Indication recording time, which is defined by repeating the cycle: Power on, start recording, stand-by, power off. |
| (Configuration method/Access method) WPS or manually /infrastructure mode. When connecting to smartphones, the camera can always work as a base without a wireless access point. (Security: WEP/WPA-PSK/WPA2-PSK) |
| Models sold in some countries/regions support IEEE 802.11b/g/n (2.4GHz) wireless LAN only. |
| When [Resolution] is set to [HD(720p)], [MJPEG] is only available. |
| When "SteadyShot" is set to "Standard" or "Off". |
| Number of effective pixels varies depending on camera settings. |
| Including a paid license. |
| There would be no sound due to no audio input on camera. |
| HDMI output automatically detect connected device resolution. |
| HDMI RAW output requires configuration through the Camera Remote SDK application. |
| A commercially available USB-LAN conversion adapter is required. |
| When [Protocol] is set to [RTMP/RTMPS], [MPEG-4 AVC / H.264] is only available. |
| When [SteadyShot] is set to [Standard] or [Off]. ISO 100 - 6400 equivalent when [SteadyShot] is set to [Active]. |
| Support only for RTMP/RTMPS |
| When using accessories that support 4ch output / 24 bits with the Multi Interface Shoe. |
| When [SteadyShot] is set to [Off]. ISO 100 - 6400 equivalent when [SteadyShot] is set to [Active]. |
| At F5.6 or greater aperture value. Fastest limit at F2 is 1/2000 s. |
| Requires USB PD (18W min.) power supply and cable (3A min.). |
| The USB cable (supplied) cannot be used for charging with the Battery Charger BC-ZD1. |
| USB PD compatible power supply and USB cable are not included for the Battery Charger BC-ZD1 (supplied). Simultaneous two-battery charging requires a USB PD compatible power supply that can deliver 30W or higher. Single-battery charging requires a USB PD compatible power supply that can deliver 18W or higher. A USB cable that can handle 3A or more is required in both cases. |
| Requires USB PD (18W min.) power supply and cable (3A min.) if charging the battery pack while it is inserted into the camera. |
| When [SteadyShot] is set to [Active] , [Standard] or [Off]. ISO 100 - 25600 equivalent when [SteadyShot] is set to [Dynamic active]. |
| Models sold in some countries/regions support IEEE 802.11b/g/n/ax (2.4GHz) wireless LAN only. |
| Models sold in some countries/regions support IEEE 802.11b/g/n/ax (2.4GHz) wireless LAN only or 802.11a/b/g/n/ac/ax (2.4GHz/5GHz) wireless LAN only. |